
This Day in History — The Computer Mouse Gets Its Patent
On this day in 1970
On November 17, 1970, Douglas Engelbart received U.S. Patent 3,541,541 for what became the computer mouse, six years after its wooden prototype was built.
The Off-Key Bard enters a computer research laboratory in Menlo Park, California, in the 1960s. The room is filled with electronic equipment, cables, display terminals and machines that seem almost unrecognizable beside today's personal computers. On a desk sits a small wooden box with a button on top, a cable trailing from its body and, underneath, wheels. At first glance it looks more like a homemade electrical instrument than something destined to become one of the most familiar objects in computing. But when a researcher moves the box across the desk, a pointer moves across a computer screen.
"What if using a computer could become as natural as pointing at something with your hand?"
On November 17, 1970, the American engineer Douglas C. Engelbart was granted U.S. Patent No. 3,541,541 for an "X-Y Position Indicator for a Display System." The device became known worldwide as the computer mouse. The patent was filed in 1967 and assigned to the Stanford Research Institute, where Engelbart worked, according to GreatPatent.com. It was not the invention of the mouse. The first prototype was built in 1964, according to SRI and the Computer History Museum, and the mouse was publicly demonstrated in 1968. The 1970 patent made the legal protection official.
Computers Before the Mouse
In the 1950s, computers were large, expensive machines run by specialists. A programmer typically prepared punched cards, submitted them, and waited for printed results, and a mistake meant starting again. By the 1960s, time-sharing and display screens had begun to open up other possibilities, and some researchers were asking whether computers could be tools for working with information in real time.
Engelbart was one of them. Wikipedia says he was born on January 30, 1925, in Portland, Oregon, served two years in the Navy as a radio and radar technician in the Philippines, and earned his bachelor's degree in electrical engineering at Oregon State in 1948. He took his master's and PhD at Berkeley in 1953 and 1955, and joined the Stanford Research Institute in Menlo Park in 1957. Wikipedia also says he read Vannevar Bush's essay "As We May Think" while serving in the Navy.
Augmenting Human Intellect
His larger goal was to use computers to extend human thinking, not only to calculate. In October 1962 he wrote an SRI report titled "Augmenting Human Intellect: A Conceptual Framework," according to Wikipedia. At SRI he founded the Augmentation Research Center, which was funded by ARPA and built the oN-Line System, or NLS, an environment for editing text, organizing information in structures, and linking documents.
Such a system needed a good way to point at things on a screen, and a keyboard was not it. The team tested several candidates. The Doug Engelbart Institute describes a 1967 study by William English, Engelbart and Melvyn Berman, "Display-Selection Techniques for Text Manipulation," which found the mouse the most accurate and efficient of the devices tested.
A Wooden Box with Wheels
Engelbart began exploring new methods of computer interaction in the early 1960s. Inspired partly by mechanical devices such as planimeters, which measure areas by tracking movement, he conceived a small hand-operated instrument that could control a position on a computer display. His early ideas used wheels arranged at right angles, allowing movement across a desk to be measured in two dimensions. The Computer History Museum traces the first design to 1963, while documentation collected by the Doug Engelbart Institute places the construction and testing of the original prototype in 1964.
The first working mouse emerged from a collaborative effort at Stanford Research Institute. Engelbart developed the concept, while engineer William "Bill" English helped turn it into a practical experimental device. A mechanical draftsman prepared drawings, and the SRI machine shop fabricated the wooden prototype. Its compact housing, single button and two perpendicular wheels made it look very different from today's mice, but the underlying principle was recognizable. English played an essential role in the prototype's development and later demonstrations, even though Engelbart alone was named as the inventor on the patent.
The wheel arrangement was straightforward in principle. Wheels measured movement along two directions, and the computer moved the pointer to match, so users never had to type coordinates. The Doug Engelbart Institute says no one clearly remembers who first called it a "mouse." Wikipedia reports that Engelbart later said the device was nicknamed the "mouse" because the tail came out the end, and the Computer History Museum quotes him saying "No one can remember." He said he was surprised the name stuck. The word "mouse" does not appear in the patent's title.
The Patent
The patent itself settles the dates. U.S. Patent No. 3,541,541, titled "X-Y Position Indicator for a Display System," was filed on June 21, 1967, and granted on November 17, 1970. It names Douglas C. Engelbart as the inventor and Stanford Research Institute as the assignee. The drawings show a hand-operated pointing device using wheels arranged at right angles to measure movement along two axes. Those measurements could be translated into corresponding movement of a position indicator on a display. The patent formalized a device already developed and demonstrated at SRI; it did not mark the moment of the mouse's original invention.
Because the patent was assigned to Stanford Research Institute, Engelbart did not personally own the patent rights. He later recalled receiving no royalties from the computer mouse, despite its widespread adoption. The institute controlled licensing during the patent's lifetime, which ended in 1987 under the patent term rules then in effect. Engelbart also recalled an agreement involving Apple worth approximately $40,000, although that figure is better treated as his recollection than as a complete accounting of the licensing arrangements. The mouse eventually became commercially successful on a scale far beyond the original research project, but that success did not translate into substantial personal income from the patent for its inventor.
The Mother of All Demos
Before the patent was granted, the world saw the mouse in action. On December 9, 1968, Engelbart gave a public demonstration at the Fall Joint Computer Conference in San Francisco. SRI describes it as a 90-minute demonstration, and the Engineering and Technology History Wiki says it showed collaborative editing, hypertext, video conferencing and the mouse, with remote users at SRI in Menlo Park linked by microwave. English designed and set up the demonstration and served as its stage manager, according to the same source. The event later became known as "the mother of all demos." The ETHW notes that its venue is listed as Brooks Hall but that the Civic Auditorium is the correct location.
The mouse used that day was not the original wooden prototype. The Computer History Museum says SRI provided Engelbart with commercially produced three-button mice for the demonstration.
From the Lab to the Desktop
The mouse did not spread immediately. Few people had computers able to run anything like NLS, and graphical software was still rare. The wheel design was also soon joined by another. The Computer History Museum says engineers at the German company Telefunken invented a mouse in the mid-1960s, and that its rolling-ball version, first described in 1968, became the standard for decades. Low End Mac calls Telefunken's Rollkugel the first commercial mouse, introduced in late 1968.
Bill English moved to Xerox PARC in 1971, where he helped develop a rolling-ball mouse for the Xerox Alto, an experimental computer introduced in 1973. The ball replaced Engelbart's original pair of wheels with a mechanism that could detect movement in any direction across a surface. Xerox subsequently brought mouse-driven graphical computing into a commercial office system with the Xerox Star in 1981, which used a ball-based pointing device. Apple's Lisa followed in 1983 with a one-button mouse, and the Macintosh brought a similar approach to a much broader audience in 1984. Over the following decades, mice continued evolving through improvements in mechanical tracking, optical sensing, ergonomics and wireless communication.
Recognition
Engelbart's recognition came late. Wikipedia lists the ACM Turing Award and the Lemelson-MIT Prize in 1997, and the National Medal of Technology in December 2000, presented by President Bill Clinton. He died on July 2, 2013, at his home in Atherton, California, aged 88.
A wooden box, two wheels below,
A pointer moved where hands would go.
From humble desk to screens worldwide,
The mouse brought thought and tech beside.
The mouse was only one piece of Engelbart's work. He did not regard it as the end of his research, which was about changing what computers could do for people: organizing information, linking documents, and working together at a distance. The mouse mattered because it fit that larger system, and the demonstration of 1968 showed how. Pointing devices have multiplied since then, with ball, optical and wireless mice, and trackpads and touchscreens as well. But the central idea of moving a hand to move a pointer is still the one the 1970 patent described.
Sources
- US3541541A — X-Y Position Indicator for a Display System — Douglas C. Engelbart, United States Patent Office (1970)
- The Computer Mouse and Interactive Computing — SRI International
- Firsts: The Mouse — Doug Engelbart Institute
- The Mouse — Computer History Museum
- SRI Mouse MN052024 — Computer History Museum
- Milestones: Invention of SRI's Computer Mouse, 1961–1968 — Engineering and Technology History Wiki
- Milestones: Public Demonstration of Online Systems and Personal Computing, 1968 — Engineering and Technology History Wiki
- The Mother of All Demos — Smithsonian Institution, Lemelson Center